Базовая информация.
Модель №. | 48В600ач |
Монтаж | Зафиксированный |
Перезаряжаемый | платный |
Емкость | 100Ач-1000Ач |
Напряжение | 24/48 |
Транспортный пакет | Деревянный поддон |
Спецификация | литий-ионный |
Товарный знак | ОБМЕН |
Источник | Китай |
Код ТН ВЭД | 8507600090 |
Описание продукта
В настоящее время не только в автомобильном мире наблюдаются признаки перехода к электромобильности. Производители погрузочно-разгрузочного оборудования уже давно являются пионерами в этой области. В течение некоторого времени растет спрос на электрические вилочные погрузчики вместо грузовиков с двигателем внутреннего сгорания. Задача: обеспечить такую же высокую эксплуатационную готовность транспортных средств, как и грузовых автомобилей с двигателями внутреннего сгорания. Именно здесь в игру вступает технология Li-ION. Он доказал свою эффективность в повседневном использовании (например, в смартфонах) и предлагает целый ряд преимуществ перед свинцово-кислотными аккумуляторами в вилочных погрузчиках:
1.КОРОТКАЯ И БЫСТРАЯ ПЕРЕЗАГРУЗКА
Аккумулятор можно заряжать даже во время коротких перерывов, что означает, что дорогостоящая и трудоемкая замена аккумулятора больше не требуется.
2. ПОВЫШЕНИЕ ЭНЕРГОЭФФЕКТИВНОСТИ
До 30 процентов больше энергии благодаря более высокой плотности энергии и высокой общей эффективности системы.
3.МОЩНАЯ СИСТЕМА
Никакой потери производительности даже при уменьшении заряда аккумулятора.
4.УДОБНОЕ РЕШЕНИЕ
Отсутствие утечек опасных аккумуляторных газов и кислот. Не требует обслуживания и легко чистится.
LiFePO4 аккумулятор 48 В 600ah литий-ионный аккумулятор для аккумулятора E-тележки / аккумулятора вилочного погрузчика / аккумулятора Bt / Lpe200
Модель | ЭНБИ-48В-600Ач |
Емкость(0.2C5A) | 600Ач |
Номинальное напряжение | 48В |
Макс. Напряжение заряда | 58,4 В |
Напряжение отключения разряда | 40 В (рекомендуется) |
Зарядное напряжение | 58,4 В±0,03 В |
Непрерывный ток разряда | 300А |
Пиковый ток разряда | 1000А в течение 5 секунд |
Вес (прибл.) | 260 кг |
Размеры батареи | 646*197*574 мм (ДСШСВ) |
| |
| 3000 Times/td> |
| |
|
| |
|
|
500 times deep cycle 80% capacity left,4 times of lead acid battery4. No memory effect,highly efficient charge anytime, no reduction of capacity5. Good performance at high temperature and high temperature resistance6. Low self-discharge rate: < 3% monthlyIndependent research and development of BMS intelligent management system to monitor the use of battery at all times and protect the safety of battery cell.brBMS with built-in high-current relay to instantly output 1000A current to ensure that the forklift has sufficient power. brThe lithium battery and the charger have CAN communication, and the BMS automatically controls the current and implements automatic charging management.brOur special BMS management system provides comprehensive management and monitoring of the battery and is equipped with a buzzer alarm function.brSuch as: Lithium battery current management, voltage management, temperature management, alarm management.brVoltage management: overcharge voltage, overdischarge voltage, voltage equalization function, etc.;brCurrent management: over current protection, short circuit protection, reverse connection protection, etc.;brTemperature management: Low temperature charging protection is below 0ºC, high temperature protection is above 65ºC, and monomer temperature difference protection exceeds 12ºC.brAlarm management: current alarm, voltage alarm, temperature alarm, SOC low alarm, relay failure alarm, etc.brBMS can also be expanded with 4G functions, check battery status through the cloud.br>
* Do not use other types of chargers to charge the lithium battery, you need to use a special charger for lithium batteries.* The output voltage and current of the lithium battery charger must meet the charging voltage and current specified in the "Lithium Battery Pack Parameters".* Do not store the battery in a humid, high temperature place;* Do not put the battery in the fire to avoid explosion;* Do not short-circuit the battery terminals or reverse charge the battery;* Do not disassemble the battery shell;* Do not touch the battery with wet hands;* Do not squeeze or hit the battery;* Prohibit overcharging, overdischarging, short circuit of positive and negative poles* Avoid charging in direct sunlight;* Do not soak in water, and the wading depth shall not be higher than 1/3 of the cabinet;* Do not disassemble or modify the battery at will;* When the battery is not in use, it should be fully charged and stored in a dry and cool place, well insulated to prevent heavy pressure and child contact, and fully charged every 3 months* If damage is found after unpacking, please contact the distributor or manufacturer in time after finding out.